Installing a Tow Bar for Dummies

September 29, 2014    

Whether you’re planning on towing on a regular basis or only for a one-time project, the basics are the same whether you’re doing towbar fitting Melbourne or in London. You don’t need a tow truck to haul everything- even your basic Sedan can become a towing machine if you know what you’re doing. It’s not exactly rocket science but there are a few things to keep in mind if you want to do it safely and correctly.

One, you’ve got to factor in the weight of your vehicle and whatever you’re towing. It’s especially imperative that you check out your car owner’s manual so you can get an idea for your vehicle’s maximum towing capacity. Then, you’ll need to factor in the total weight of not only the vehicle you’re towing but whatever you might be hauling inside it. After all, not only will that affect the size of tow bar you’ll need to do towbar fitting Melbourne but what you’ll need to do as far as stabilizing any vehicle you tow with yours. Does your suspension have airbags?

This will insure that your tow bar and whatever you’re hauling is properly supported. Your typical RV dealer or towing accessories store should be able to give you an idea of what kind of tow bar is most appropriate for your towing needs.

Now that you have an idea of what you can haul and you’ve chosen a tow bar, it’s time to install it onto your vehicle.

First, you’ll want to do towbar fitting Melbourne on a brake plate or bracket, safety cables, and a brake light wiring kit that will work with the tow bar system you’ve selected. This is very important in ensuring that the tow bar is installed properly. The brake plate will be what keeps your bar attached to the vehicle. Safety cables will give you extra reinforcement between your vehicle and what you’re towing. And the brake light wiring kit? That will ensure that whenever you brake, the brakes of the vehicle you’re towing will light up too.

You’ll be installing a tow bar of the brake plates on the front of the vehicle you’ll be towing. Many vehicles require specific plates. When you install the brake plate into the car, look for the two mounting points underneath the car’s chassis legs. A bumper cut may be required. Chances are, if your car was manufactured after 1998, there will be tow bar mounting points already installed. If not, please consult an RV dealer or towing accessories store.

Once you’ve got the brake plates installed, it’s time to select the tow bar you’ll need. Whether that’s a Swan Neck, a detachable, or a fixed Flange tow bar, the kind you’ll need all depends on what you’re towing and what features you’d like available in your vehicle. A towing accessory store associate or an RV dealer should be able to help you make the best decision as far as what kind of tow bar you need.

Now that you’ve got a better idea of how to install a tow bar, it’s time to get out there and begin towing.

  /  

0 COMMENTS

LEAVE A COMMENT
You filled this out wrong.
You filled this out wrong.
You filled this out wrong.
You filled this out wrong.